Ragan and Arrowsmith, 4th edition references

Ague, J.J., 1994, Mass transfer during Barrovian metamorphism of pelites, South-central Connecticut. I: evidence for changes in composition and volume: American Journal of Science, v. 294, p. 989-1057.
Alcock, James, 1994a, Simulating the historical process to create laboratory exercises that teach research methods: Journal of Geological Education, v. 42, p. 188-124.
Alcock, James, 1994b, The discordant Doe Run thrust: implications for stratigraphy and structure in the Glenarm Supergroup, southeastern Pennsylvania Piedmont: Geological Society of America Bulletin, v. 106, p. 932-941.
Ailleres, Laurent & Michel Campenois, 1994, Refinements to the Fry method (1979) using image processing: Journal of Structural Geology, v. 16, p. 1327-1330.
Ambrose, J.W., & H.T. Carswell, 1962, Right sectional block diagrams and random sections drawn with the aid of a stereonet: Proceeding of the Geological Association of Canada, v. 13, p. 119-128.
Anderson, E.M., 1951, The dynamics of faulting: Second Edition, Oliver & Boyd, Edinburgh, 206 p.
Angelier, J., 1994, Fault slip analysis and paleostress reconstruction: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 53-100.
Argand, Emile, 1911, Les nappes de recouvrement des Alpes Pennines et leurs prolongement structuraux: Beiträge zur geologischen Karte der Schweiz, nue Folge 31, p. 1-26.
Attewell, P.B., & I.W. Farmer, 1976, Principles of Engineering Geology: John Wiley, New York, 1045 p.
Aydin, Atilla, & A.M. Johnson, 1983, Analysis of faulting in sandstones: Journal of Structural Geology, v. 5, p. 19-31.
Aydin, Atilla, & Ze'ev Reches, 1982, Number and orientation of fault sets in the field and in experiments: Geology, v. 10, p. 107-112.
Badgley, P.C., 1959, Structural methods for the exploration geologist: Harper & Row, New York, 280 p.
Badgley, P.C., 1965, Structural and tectonic principles: Harper & Row, New York, 521 p.
Bailey, E.B., & J.H. Mackin, 1937, Recumbent folding in the Pennsylvania Piedmont -- preliminary statement: American Journal of Science, v. 33, p. 187-190.
Balk, Robert, 1937, Structural behavior of igneous rock: Geological Society of America Memoir 5, 177 p.
Bally, A.W., P.L. Gordy, & G.A. Stewart, 1966, Structure, seismic data, and orogenic evolution of southern Canadian Rocky Mountains: Bulletin of Canadian Petroleum Geology, v. 14, p. 337-381.
Bambach, R.K., 1973, Tectonic deformation of composite-mold fossil Bivalvia (Mollusca): American Journal of Science, v. 273-A, p. 409-430.
Barnes, C.W., & R.W. Houston, 1969, Basement response to the Laramide Orogeny at Coad Mountain, Wyoming: Contributions to Geology, v. 8, p. 37-41.
Barnes, J.W., 1991, Basic geologic mapping: Second Edition, Open University Press, Milton Keynes, 118 p.
Bayly, M.B., 1971, Similar folds, buckling and great circle patterns: Journal of Geology, v. 79, p. 110-118.
Bayly, Brian, 1992, Mechanics of structural geology: Springer-Verlag, New York, 253 p.
Beach, Alastair, 1979, The analysis of deformed belemnites: Journal of Structural Geology, v. 1, p. 127-135.
Bear, Jacob & Yehuda Bachmat, 1990, Transport phenomena in porous media -- basic equations: in Jacob Bear & M.Y. Corapcioglu, editors, Fundamentals of transport phenomena in porous media, Martinus Nijhoff Publishers, Dordrecht, p. 3-61.
Beer, F.P., & E.R. Johnson, Jr., 1992, Mechanics of materials: Second Edition, McGraw-Hill, Inc., New York, 740 p.
Bell, A.M., 1981, Vergence: an evaluation: Journal of Structural Geology, v. 3, p. 197-202.
Bengtson, C.A., 1981, Statistical curvature analysis techniques for structural interpretation of dipmeter data: American Association of Petroleum Geologists Bulletin, v. 65, p. 312-332.
Bengtson, C.A., 1983, Easy solutions stereonet rotation problems: American Association of Petroleum Geologists Bulletin, v. 67, p. 706-713.
Berthelsen, A., 1960, Structure contour maps applied in the analysis of double fold structures: Geologische Rundschau, v. 49, p. 459-466.
Berthelsen, A., E. Bondesen & S.B. Jensen, 1962, On the so-called wildmigmatites: Krystalinikum, v. 1, p. 31-49.
Bevington, P.R., 1969, Data reduction and error analysis for the physical sciences: McGraw-Hill Book Co., New York, 336 p.
Billings, M.P., 1972, Structural geology: Third Edition, Prentice-Hall, Englewood Cliffs, N.J., 606 p.
Bjørnerud, M.G., 1991, Conveying principles of finite strain with standard graphics software: Journal of Geological Education, v. 39, p. 23-27.
Blake, E.W., & G.K.C. Clarke, 1992, Interpretation of borehole-inclinometer data: a general theory applied to a new instrument: Journal of Glaciology, v. 38. p. 113-124.
Boas, M.L., 1983, Mathematical methods in the physical sciences: Second Edition, John Wiley, New York, 793 p.
Bolt, B.A., 1993, Earthquakes: Newly Revised and Expanded Edition, W.H. Freeman and Company, New York, 331 p.
Borradaile, G.J., 1976, ``Structural facing'' (Shackleton's Rule) and the Palaeozoic rocks of the Malaguide Complex near Velez Rubio, SE Spain: Proceedings of the Koninklijke Nederlandse Akademie van Wetenschappen, Amsterdam, series B, v. 79, p. 330-336.
Borradaile, G.J., 1978, Transected folds: a study illustrated with examples from Canada and Scotland: Geological Society of America Bulletin, v. 89, p. 481-493.
Borradaile, G.J., 1987, Analysis of strained sedimentary fabrics: review and tests: Canadian Journal of Earth Science, v. 24, p. 442-455.
Borradaile, G.J., & J. McArthur, 1991, Tests of strain analysis by experimental deformation: Tectonophysics, v. 185, p. 325-333.
Bott, M.H.P., 1959, The mechanics of oblique-slip faulting: Geological Magazine, v. 96, p. 109-117.
Boulter, Clive, 1989, Four dimensional analysis of geologic maps: John Wiley, New York, 296 p.
Boyer, S.E., & David Elliott, 1982, Thrust systems: American Association of Petroleum Geologists Bulletin, v. 66, p. 1196-1230.
Boyce, W.E., & R.C. DiPrima, 1977, Elementary differential equations and boundary value problems: Third Edition, John Wiley, New York, 582 p.
Brewer, R.C., & R.H. Groshong, Jr., 1993, Restoration of cross sections above intrusive salt domes: American Association of Petroleum Geologists Bulletin, v. 77, p. 1769-1780.
Brown, E.T., S.J. Green & K.P. Sinha, 1981, The influence of rock anisotropy on hole deviation in rotary drilling -- a review: International Journal of Rock Mechanics and Mining Science & Geomechanical Abstracts, v. 18, p. 387-401.
Bucher, W.H., 1920, The mechanical interpretation of joints, part I: Journal of Geology, v. 28, p. 707-730.
Bucher, W.H., 1933, Deformation of the Earth's crust: Princeton University Press, Princeton, 518 p.
Busk, H.G., 1929, Earth flexures: Cambridge University Press, London, 106 p.
Butler, R.W.H., 1982a, Hanging wall strain: a function of duplex shape and footwall topography: Tectonophysics, v. 88, p. 235-246.
Butler, R.W.H., 1982b, The terminology in thrust zones: Journal of Structural Geology, v. 4, p. 239-245.
Butler, R.W.H., 1985, Thrust tectonics: a personal view: Geological Magazine, v. 122, p. 223-232.
Buxtorf, A., 1916, Prognosen und Befunden beim Hauensteinbasis- und Grenchenberg-tunnel und die Bedeutung der letzeren für die Geologie des Juragebirges: Verhandlungen der Naturforschenden Gesellschaft in Basel, v. 27, p. 184-254.
Byerlee, J.D., 1978, Friction of rocks: Pure and Applied Geophysics, v. 116, p. 615-629.
Campbell, J.D., 1951, Some aspects of rock folding by shearing deformation: American Journal of Science, v. 240, p. 625-639.
Carey, S.W., 1962, Folding: Journal of the Alberta Society of Petroleum Geologists, v. 10, p. 95-144.
Carr, J.R., 1995, Numerical analysis for the geological sciences: Prentice-Hall, Inc., Englewood Cliffs, 592 p.
Casey, M., D. Dietrich & J.G. Ramsay, 1983, Methods for determining deformation history for chocolate tablet boudinage with fiberous crystals: Tectonophysics, v. 92, p. 211-239.
Célérier, Bernard, 1988, How much does slip on a reactivated fault plane constrain the stress tensor?: Tectonics, v. 7, p. 1257-1278.
Chamberlin, R.T., 1919, The Appalachian folds of central Pennsylvania: Journal of Geology, v. 18, p. 228-251.
Charlesworth, H.A.K., & W.E. Kilby, 1981, Calculating thickness from outcrop and drill-hole data: Bulletin of Canadian Petroleum Geology, v. 29, p. 277-292.
Charlesworth, H.A.K., C.W. Langenberg, & J. Ramsden, 1976, Determining axes, axial planes and sections of macroscopic folds using computer-based methods: Canadian Journal of Earth Science, v. 13, p. 54-65.
Chester, J.S., & F.M. Chester, 1990, Fault-propagation folds above thrusts with constant dip: Journal of Structural Geology, v. 12, p. 903-910.
Chauvenet, William, 1850, A treatise on plane and spherical trigonometry: Henry Perkins, Philadelphia, 256 p.
Cheeney, R.F., 1983, Statistical methods in geology: George Allen & Unwin, London, 169 p.
Chen, R.T., 1993, Strain factorization by identical finite increments: Journal of Structural Geology, v. 15, p. 207-218.
Christensen, M.N., 1963, Structural analysis of Hoosac Nappe in northwestern Massachusetts: America Journal of Science, v. 261. p. 97-107.
Clark, R.H., & D.B. McIntyre, 1951, The use of the terms pitch and plunge: American Journal of Science, v. 249, p. 591-599.
Cloos, Ernst, 1947, Oolite deformation in South Mountain fold, Maryland: Geological Society of America Bulletin, v. 58, p. 843-917.
Cluer, J.K., 1992, A graphic method for projecting topographic profiles to various scales: Journal of Geology, v. 100, p. 135-137.
Coates, J., 1945, The construction of geologic sections: The Quarterly Journal of the Geological, Mining and Metallurgical Society of India, v. 17, p. 1-11.
Cobbold, P.R., & H. Quinquis, 1980, Development of sheath folds in shear regimes: Journal of Structural Geology, v. 1/2, p. 119-126.
Compton, R.R., 1967, Analysis of Pliocene-Pleistocene deformation and stresses in northern Santa Lucia Range, California: Geological Society of America Bulletin, v. 77, p. 1361-1380.
Compton, R.R., 1985, Manual of Field Geology: Second Edition, John Wiley, New York, 398 p.
Connolly, H.J.C., 1936, A contour method of revealing some ore structures: Economic Geology, v. 259-271.
Courant, Richard, 1936, Differential and integral calculus, Volume II: Interscience Publishers, New York, 628 p.
Crespi, J.M., 1986, Some guidelines for the practical application of Fry's method of strain analysis: Journal of Structural Geology, v. 8, p. 799-808.
Crowell, J.C., 1959, Problems of fault nomenclature: American Association of Petroleum Geologists Bulletin, v. 43, p. 2653-2674.
Cruden, D.M., 1968, Methods of calculation the axes of cylindrical folds: a review: Geological Society of America Bulletin, v. 79, p. 143-148.
Cruden, D.M., 1971, Traces of a lineation on random planes: Geological Society of America Bulletin, v. 82, p. 2303-2305.
Cruden, D.M., 1986, The geometry of slip surfaces beneath landslides: prediction from surface measurements: discussion: Canadian Geotechnical Journal, v. 23, p. 94.
Cruden, D.M., & H.A.K. Charlesworth, 1976, Errors in strike and dip measurements: Geological Society of America Bulletin, v. 87, p. 977-980.
Cummins, W.A., & R.M. Shackleton, 1955, The Ben Lui recumbent syncline (S.W. Highlands): Geological Magazine, v. 92, p. 353-363.
Dahlstrom, C.D.A., 1969a, Balanced cross sections: Canadian Journal of Earth Science, v. 6, p. 743-757.
Dahlstrom, C.D.A., 1969b, The upper detachment in concentric folding: Bulletin of Canadian Petroleum Geology, v. 17, p. 326-346.
Dahlstrom, C.D.A., 1970, Structural geology in the eastern margin of the Canadian Rocky Mountains: Bulletin of Canadian Petroleum Geology, v. 18, p. 332-406.
Dahlstrom, C.D.A., 1990, Geometric constraints derived from the law of conservation of volume and applied to evolutionary models for detachment folding: American Association of Petroleum Geology Bulletin, v. 74, p. 336-344.
Dallmus, K.F., 1958, Mechanics of basin evolution and its relation to the habitat of oil in the basin: in L.G. Weeks, editor, Habitat of oil, American Association of Petroleum Geologists, p. 883-931.
Davis, J.C., 1973, Statistics and data analysis in geology: John Wiley, New York, 550 p.
Davis, J.C., 1986, Statistics and data analysis in geology: Second Edition, John Wiley, New York, 646 p.
Davis, R.O., & A.P.S. Selvadurai, 1996, Elasticity and geomechanics: Cambridge University Press, Cambridge, 201 p.
Deness, Bruce, 1970, A method of contouring polar diagram using curvilinear counting cells: Geological Magazine, v. 107, p. 55-66.
Deness, Bruce, 1972, A revised method of contouring stereograms using curvilinear cells: Geological Magazine, v. 109, p. 157-163.
Dennis, J.G., 1967, International Tectonic dictionary: American Association of Petroleum Geologists, Memoir 7, 196 p.
Dennison, J.M., 1968, Analysis of geologic structures: W.W. Norton & Company, New York, 209 p.
Dennison, J.M., & H.P. Woodward, 1963, Palinspastic maps of central Appalachians: American Association of Petroleum Geology Bulletin, v. 47, p. 666-680.
Den Tex, E., 1954, Stereographic distinction of linear and planar structures from apparent lineations in random exposure planes: Journal of the Geological Society of Australia, v. 1, p. 55-66.
De Paor, D.G., 1980, Some limitations of the technique of strain analysis: Tectonophysics, v. 64, p. T29-T31.
De Paor, D.G., 1988, Balanced sections in thrust belts, Part 1: construction: American Association of Petroleum Geologists Bulletin, v. 72, p. 73-90.
De Paor, D.G., 1991, A modern solution to the classical three-point problem: Journal of Geological Education, v. 39, p. 322-324.
De Paor, D.G., 1994, A parametric representation of ellipses and ellipsoids: Journal of Structural Geology, v. 16, p. 1331-1333.
De Paor, D.G. & D.C. Bradley, 1988, Balanced sections in thrust belts, Part 2: computerized line and area balancing: Geobyte, v. 3, p. 33-37.
Devlin, K.J., 1994, Mathematics: the science of pattern: Scientific American Library, New York, 215 p.
Dunne, W.M., & P.L. Hancock, 1994, Palaeostress analysis of small-scale brittle structures: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 101-120.
Dunne, W.M., C.M. Onasch & R.T. Williams, 1990, The problem of strain-marker centers and the Fry method: Journal of Structural Geology, v. 12, p. 933-938.
Durelli, A.J., E.A. Phillips & C.H. Tsao, 1958, Introduction to the theoretical and experimental analysis of stress and strain: McGraw-Hill Book Company, Inc., 498 p.
Durney, D.W., & H.J. Kisch, 1994, A field classification and intensity scale for first-generation cleavages: AGSO Journal of Australian Geology & Geophysics, v. 15, p. 257-295 (see corrections v. 15, p. 539).
De Sitter, L.U., 1964, Structural geology: Second Edition, McGraw-Hill, New York, 551 p.
De Sitter, L.U., & H.J. Zwart, 1960, Tectonic development in supra- and infrastructures of a mountain chain: 21st International Geological Congress, Part 18, p. 248-256.
Dickinson, W.R., 1966, Structural relationships of San Andreas fault system, Cholame Valley and Castle Mountain Range: Geological Society of America Bulletin, v. 77, p. 707-726.
Donath, F.A., 1961, Experimental study of shear failure in anisotropic rocks: Geological Society of America Bulletin, v. 72, p. 985-990.
Donath, F.A., 1962, Analysis of Basin-Range structure, South-central Oregon: Geological Society of America Bulletin, v. 73, p. 1-16.
Donath, F.A., 1963, Fundamental problems in dynamic structural geology: in T.W. Donnelly, editor, Earth sciences -- problems and progress in current research, University of Chicago Press, Chicago, p. 83-103.
Donath, F.A., 1964, Strength variation and deformation behavior in anisotropic rocks: in W.R. Judd, editor, State of stress in the earth's crust, American Elsevier, New York, p. 281-297.
Donath, F.A., & R.B. Parker, 1964, Folds and folding: Geological Society of America Bulletin, v. 75, p. 45-62.
Draper, Grenville, 1984, A simple device to aid plotting of pi diagrams in structural geology: Journal of Geological Education, v. 32, p. 184-185.
Drucker, D.C., 1967, Introduction to mechanics of deformable solids: McGraw-Hill Book Company, New York, 445 p.
Dubey, A.K., 1980, Model experiments showing simultaneous development of folds and transcurrent faults: Tectonophysics, v. 65, p. 69-84.
Dudley, R.M., P.C. Perkins & Evariste Giné M., 1975, Statistical tests for preferred orientation: Journal of Geology, v. 83, p. 685-705.
Dunnet, D., 1969, A technique of finite strain analysis using elliptical particles: Tectonophysics, v. 7, p. 117-136.
Dunnet, D., & A.W.B. Siddans, 1971, Non-random sedimentary fabrics and their modification by strain: Tectonophysics, v. 12, p. 307-325.
Eakins, P.R., 1987, Faults and faulting: in C.K. Seyfert, editor, The Encyclopedia of Structural Geology and Plate Tectonics, Van Nostrand Reinhold Co., New York, p. 228-239.
Eardley, A.J., 1938, Graphic treatment of folds in three dimensions: American Association of Petroleum Geologists Bulletin, v. 22, p. 483-489.
Eisenhart, L.P., 1966, Coordinate Geometry: Dover Publications, Inc., New York, 298 p.
Elliott, David, 1965, The quantitative mapping of directional minor structures: Journal of Geology, v. 73, p. 865-880.
Elliott, David, 1970, Determination of finite strain and initial shape from deformed elliptical objects: Geological Society of America Bulletin, v. 81, p. 2221-2236.
Elliott, David, 1972, Deformation paths in structural geology: Geological Society of America Bulletin, v. 83, p. 2621-2638.
Elliott, David, 1976, Energy balance in thrusts and deformation mechanisms of thrust sheets: Proceedings of the Royal Society of London, v. A2 83, p. 289-312.
Elliott, David, 1983, The construction of balanced cross-sections: Journal of Structural Geology, v. 5, p. 101.
Elliott, David, & M.R.W. Johnson, 1980, Structural evolution in the northern part of the Moine thrust belt, NW Scotland: Transactions of the Royal Society of Edinburgh: Earth Sciences, v. 71, p. 69-96.
Engelder, Terry, 1993, Stress regimes in the lithosphere: Princeton University Press, Princeton, New Jersey, 457 p.
Engelder, Terry, 1994, Brittle crack propagation: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 43-52.
Engelder, Terry, 1994, Deviatoric stressitis: a virus infecting the Earth Science community: EOS, Transactions, American Geophysical Union, v. 75, p. 209-212.
Engelder, Terry, 1999, Transitional-tensile fracture propagation: a status report: Journal of Structural Geology, v. 21, p. 1049-1055.
Epard, J.-L., & R.H. Groshong, Jr., 1993, Excess area and depth to detachment: American Association of Petroleum Geologists Bulletin, v. 77, p. 1291-1302.
Erslev, E.A., 1986, Basement balancing of Rocky Mountain foreland uplifts: Geology, v. 14, p. 259-262.
Erslev, E.A., 1988, Normalized center-to-center strain analysis of packed aggregates: Journal of Structural Geology, v. 10, p. 201-209.
Erslev, E.A. & Hongxing Ge, 1990, Least-squares center-to-center and mean object ellipse fabric analysis: Journal of Structural Geology, v. 12, p. 1047-1059.
Faill, R.T., 1973a, Kink band folding, Valley and Ridge Province, Pennsylvania: Geological Society of America Bulletin, v. 84, p. 1289-1314.
Faill, R.T., 1973b, Tectonic development of the Triassic Newark-Gettysburg Basin in Pennsylvania: Geological Society of America Bulletin, v. 84, p. 725-740.
Fairbairn, H.W., 1949, Structural petrology of deformed rocks: Addison-Wesley, Cambridge, 344 p.
Ferguson, C.C., 1981, A strain reversal method for estimating extension from fragmented rigid inclusions: Tectonophysics, v. 79, p. T43-T52.
Ferguson, C.C., 1987, Fracture and separation histories of stretched belemnites and other rigid-brittle inclusions in tectonites: Tectonophysics, v. 139, p. 255-273.
Ferguson, C.C., & G.E. Lloyd, 1984, Extension analysis of stretched belemnites: a comparison of methods: Tectonophysics, v. 101, p. 199-206.
Ferguson, H.G., & S.W. Muller, 1949, Structural geology of the Hawthorne and Tonopah quadrangles, Nevada: U.S. Geological Survey Professional Paper 216, 55 p.
Ferguson, J., 1994, Introduction to linear algebra in geology: Chapman & Hall. London, 203 p.
Ferry, J.M., 1994, Overview of the petrologic record of fluid flow during regional metamorphism in Northern New England: American Journal of Science, v. 294, p. 905-988.
Fisher, D.J., 1941, Drillhole problems in the stereographic projection: Economic Geology, v. 36, p. 551-560.
Fisher, N.I., T. Lewis & B.J.J. Embleton, 1987, Statistical analysis of spherical data: Cambridge University Press, London, 329 p.
Fisher, R.A., 1953, Dispersion on a sphere: Proceedings of the Royal Society of London, v. A125, p. 54-59.
Fletcher, R.C., & D.D. Pollard, 1999, Can we understand structural and tectonic processes and their products without appear to a complete mechanics?: Journal of Structural Geology, v. 21, p. 1071-1088.
Fleuty, M.J., 1964, The description of folds: Proceedings of the Geologists Association, v. 75, p. 461-492.
Fleuty, M.J., 1974, Slickensides and slickenlines: Geological Magazine, v. 112, p. 319-322.
Fleuty, M.J., 1987a, Folds and folding: in C.K. Seyfert, editor, The Encyclopedia of Structural Geology and Plate Tectonics, Van Nostrand Reinhold Co., New York, p. 249-270.
Fleuty, M.J., 1987b, Slikensides and slikenlines: in C.K. Seyfert, editor, The Encyclopedia of Structural Geology and Plate Tectonics, Van Nostrand Reinhold Co., New York, p. 729-731.
Flinn, Derek, 1965, On the symmetry principle and the deformation ellipsoid: Geological Magazine, v. 102, p. 35-45.
Ford, Mary, & C.C. Ferguson, 1985, Cleavage strain in the Variscan Fold Belt, County Cork, Ireland, estimated from stretched arsenopyrite rosettes: Journal of Structural Geology, v. 7, p. 217-223.
Forsyth, D.W., 1992, Finite extension and low-angle normal faulting: Geology, v. 20, p. 27-30.
Fowler, C.M.R., 1990, The solid earth: Cambridge University Press, Cambridge, England, 472 p.
France, Duncan, 1987, Recumbent folds: in C.K. Seyfert, editor, The Encyclopedia of Structural Geology and Plate Tectonics, Van Nostrand Reinhold Co., New York, p. 650-656.
Freeman, Tom, 1991, Procedures in field geology: Friendship Publications, Columbia, Miissouri, 89 p.
Fry, Norman, 1979a, Random point distributions and strain measurements in rocks: Tectonophysics, v. 60, p. 89-105.
Fry, Norman, 1979b, Density distribution techniques and strain length methods for determination of finite strains: Journal of Structural Geology, v. 1, p. 221-229.
Gage, Maxwell, 1979, A dilemma in structural mapping: New Zealand Journal of Geology and Geophysics, v. 22, p. 293.
Garland, G.D., 1979, Introduction to Geophysics (Mantle, Core and Crust): Second Edition, W.B. Saunders Company, Philadelphia, 494 p.
Geiser, J., P.A. Geiser, Roy Kligfield, R. Ratliff & M. Rowan, 1988, New applications of computer-based section construction: strain analysis, local balancing, and subsurface fault prediction: The Mountain Geologist, v. 25, p. 47-59.
Geiser, P.A., 1988, The role of kinematics in the construction and analysis of geological cross sections in deformed terranes: in Gautam Mitra & Steven Wojtal, editors, Geometries and mechanisms of thrustings, with special reference to the Appalachians, Geological Society of America Special Paper 222, p. 47-76.
Ghaleb, A.R., & Normal Fry, 1995, CSTRAIN: a FORTRAN 77 program to study Fry's plots in two-dimensional simulated models: Computers & Geosciences, v. 21, p. 825-831.
Gill, J.E., 1941, Normal and reverse faults: Journal of Geology, v. 43, p. 1071-1079.
Gill, J.E., 1935, Fault nomenclature: Royal Society of Canada Transactions, Third series, v. 35, sec. 4, p. 71-85.
Gill, J.E., 1971, Continued confusion in the classification of faults: Geological Society of America Bulletin, v. 82, p. 1389-1392.
Gilluly, James, A.C. Waters & A.O. Woodford, 1968, Principles of geology: Third Edition, Freeman, San Francisco, 687 p.
Goetze, Christopher & Brian Evans, 1979, Stress and temperature in the bending lithosphere as constrained by experimental rock mechanics: Geophysical Journal of the Royal Astronomical Society, v. 59, p. 463-478.
Goguel, Jean, 1952, Traite de tectonique: Masson et Cie, Paris, 383 p.
Goguel, Jean, 1962, Tectonics: Freeman, San Francisco, 384 p.
Goldstein, Herbert, 1980, Classical Mechanics: Second Edition, Addison-Wesley, Reading, Massachusetts, 672 p.
Goodman, R.E., 1976, Methods of geological engineering in discontinuous rock: West Publishing Company, St. Paul, 472 p.
Graham, R.L., D.E. Knuth & Oren Patashnik, 1989, Concrete Mathematics: Addison-Wesley Publishing Co., Reading, Massachusetts, 624 p.
Gray, D.R., & D.W. Durney, 1979, Investigations on the mechanical significance of crenulation cleavage: Tectonophysics, v. 58, p. 35-79.
Gretener, P.E., 1981, Pore pressure: fundamentals, general ramifications and implications for structural geology (revised): American Association of Petroleum Geologists Continuing Education Course Notes Series, No. 4, 131 p.
Groshong, R.H., Jr., 1990, Unique determination of normal fault shape from hanging-wall bed geometry in detached half grabens: Eclogae geologicae Helvetiae, v. 83, p. 455-471.
Groshong, R.H., Jr., 1994, Area balance, depth to detachment, and strainin extension: Tectonics, v. 13, p. 1488-1497.
Groshong, R.H., Jr., & J.-L. Epard, 1994, The role of strain in area-constant detachment faulting: Journal of Structural Geology, v. 16, p. 613-618.
Groshong, R.H., Jr., 1999, 3-D Structural Geology: Springer, Berlin, 324 p.
Hafner, W., 1951, Stress distribution and faulting: Geological Society of America Bulletin, v. 62, p. 373-398.
Halliday, David & Robert Resnick, 1978, Physics, Parts I and II combined: Third Edition, John Wiley & Sons, New York, 131 p.
Hamblin, W.K., 1965, Origin of ``reverse drag'' on the downthrown side of normal faults: Geological Society of America Bulletin, v. 76, p. 1145-1164.
Handin, John, 1969, On the Coulomb-Mohr failure criterion: Journal of Geophysical Research, v. 74, p. 5343-5349.
Haneberg, W.C., 1990, A Lagrangian interpolation method for three-point problems: Journal of Structural Geology, v. 12, p. 945-948.
Hansen, Edward, 1971, Strain facies: Springer Verlag, New York, 207 p.
Hansen, W.R., 1960, Improved Jacob staff for measuring inclined stratigraphic intervals: American Association of Petroleum Geologists Bulletin, v. 44, p. 252-255.
Hardcastle, K.C., 1989, Possible paleostress tensor configurations derived from fault-slip data in eastern Vermont and western New Hampshire: Tectonics, v. 8, p. 256-284.
Harker, Alfred, 1884, Graphical methods in field geology: Geological Magazine, v. 1, p. 154-162.
Harker, Alfred, 1885, On slaty cleavage and allied rock structures, with special reference to the mechanical theories of their origin: British Association for the Advancement of Science Report, p. 813-852.
Harrison, J.M., 1963, Nature and significance of geologic maps: in C.C. Albritton, Jr., editor, The fabric of geology, Addison-Wesley, Reading, p. 225-232.
Herold, S.C., 1933, Projection of dip angle on profile section: American Association of Petroleum Geologists Bulletin, v. 17, p. 740-742.
Hewett, D.F., 1920, Measurement of folded beds: Economic Geology, v. 15, p. 367-385.
Higgins, C.G., 1962, Reconstruction of flexure fold by concentric arc method: American Association of Petroleum Geologists Bulletin, v. 46, p. 1737-1739.
Higgs, D.V., & George Tunell, 1959, Angular relations of lines and planes with applications to geologic problems: W.C. Brown Co., Dubuque, 43 p.
Hill, E.S., 1972, Elements of structural geology: second edition, John Wiley & Sons, Inc., New York, 502 p.
Hill, M.L., 1959, Dual classification of faults: American Association of Petroleum Geologist Bulletin, v. 43, p. 217-221.
Hill, M.L., 1963, Role of classification in geology in C.C. Albritton, editor, The fabric of geology, Addison-Wesley, Reading, Mass., p. 164-174.
Hobbs, B.E., W.D. Means, & P.F. Williams, 1976, An outline of structural geology: John Wiley, New York, 571 p.
Hobson, G.D., 1942, Calculating the true thickness of a folded bed: American Association of Petroleum Geologist Bulletin, v. 26, p. 1827-1832.
Hoek, Evert, & J.W. Bray, 1981, Rock slope engineering: third edition, Institute of Mining and Metallurgy, London, 358 p.
Holdsworth, R.E., 1988, The stereographic analysis of facing: Journal of Structural Geology, v. 10, p. 219-223.
Hoeppener, R., 19xx, Tektonik im Schiefergebirge: Geologische Rundschau, v. 44, p. 26-58.
Hossack, J.R., 1979, The use of balanced cross-sections in the calculation of orogenic contraction: a review: Journal of the Geological Society of London, v. 136, p. 705-711.
Hossain, K.M., 1979, Determination of strain from stretched belemnites: Tectonophysics, v. 88, p. 279-288.
Howard, J.H., 1993, Restoration of cross-sections through unfaulted, variably strained strata: Journal of Structural Geology, v. 15, p. 1331-1342.
Howson, M., & E.J. Sides, 1986, Borehole desurvey calculations: Computers & Geoscience, v. 12, p. 97-104.
Hsü, K.J., 1968, Principles of melanges and their bearing on the Franciscan-Knoxville paradox: Geological Society of America Bulletin, v. 79, p. 1063-1074.
Hubbert, M.K., 1931, Graphic solution of strike and dip from two angular components: American Association of Petroleum Geologist Bulletin, v. 15, p. 283-2862.
Hubbert, M.K., 1951, Mechanical basis for certain familiar geologic structures: Geological Society of America Bulletin, v. 62, p. 365-372.
Hudleston, P.J., 1973, Fold morphology and some implications of theories of fold development: Tectonophysics, v. 16, p. 1-46.
Hudleston, P.J., 1986, Extracting information from folds in rocks: Journal of Geological Education, v. 34, p. 237-245.
Hudleston, P.J., & O. Stephansson, 1973, Layer shortening and fold shape development in the buckling of single layers: Tectonophysics, v. 17, p. 299-321.
Hudleston, P.J., & Labao Lan, 1993, Information from fold shapes: Journal of Structural Geology, v. 15, p. 253-264.
Hudleston, P.J., & Labao Lan, 1994, Rheological controls on the shape of single-layer folds: Journal of Structural Geology, v. 16, p. 1007-1021.
Hudson, J.A., 1989, Rock mechanics principles in engineering practice: Butterworths, London, 72 p.
Hunt, R.E., 1986, Geotechnical engineering analysis and evaluation: McGraw-Hill, New York, 729 p.
Ickes, E.L., 1923, Similar, parallel and neutral surface types of folding: Economic Geology, v. 18, p. 575-591.
Ickes, E.L., 1925, The determination of formation thickness by the method of graphical integration: American Association of Petroleum Geologists Bulletin, v. 9, p. 451-463.
Ickes, E.L., 1934, Formulas for calculating stratigraphic thickness exposed between two dips: American Association of Petroleum Geologists Bulletin, v. 18, p. 139-142.
Jaeger, J.C., 1969, Elasticity, fracture and flow: Third Edition, Methuen, London, 268 p.
Jaeger, J.C., & N.G.W. Cook, 1979, Fundamentals of rock mechanics: Third Edition, Methuen, London, 593 p.
Johnson, A.M., 1970, Physical processes in geology: Freeman, Cooper & Company, San Francisco, 577 p.
Jolly, R.J.H., & D.J. Sanderson, 1997, A Mohr circle construction for the opening of a pre-existing fracture: Journal of Structural Geology, v. 19, p. 887-892.
Jones, P.B., 1984, Sequence of formation of back-limb thrusts and imbrications: implications for development of Idaho-Wyoming thrust belt: American Association of Petroleum Geologists Bulletin, v. 68, p. 816-818.
Jones, P.B., 1987, Quantitative geometry of thrust and fold belt structures: Methods in Exploration Series No. 6, American Association of Petroleum Geologists, 26 p.
Jones, T.A., D.E. Hamilton & C.R. Johnson, 1986, Contouring geologic surfaces with the computer: Van Nostrand Reinhold, New York, 314 p.
Kalsbeek, F., 1963, A hexagonal net for the counting out and testing of fabric diagrams: Neues Jahrbuch für Mineralogie, Monatshefte, v. 7, p. 173-1776.
Kamb, W.B., 1959, Petrofabric observations from Blue Glacier, Washington, in relation to theory and experiment: Journal of Geophysical Research, v. 64, p. 1891-1909.
Kanagawa, K., 1990, Automated two-dimensional strain analysis using deformed elliptical markers using an image analysis system: Journal of Structural Geology, v. 12, p. 139-143.
Kanamori, H., 1994, Mechanics of earthquakes: Annual Review of Earth and Planetary SCiencesd, v. 22, p. 207-237.
Kennie, T.J.M., & Gordon Petrie, 1990, Digital terrain modeling: in T.J.M. Kennie & Gordon Petrie, editors, Engineering Surveying Technology, Blackie and Son Ltd., Glasgow, p. 391-426.
Kilby, W.E., & H.A.K. Charlesworth, 1980, Computerized downplunge projection and the analysis of low-angle thrust-faults in the Rocky Mountain Foothills of Alberta, Canada: Tectonophysics, v. 66, p. 287-299.
Kitson, H.W., 1929, Graphic solution of strike and dip from two dip components: American Association of Petroleum Geologists Bulletin, v. 13, p. 1211-1213.
Kottlowski, F.E. 1965, Measuring stratigraphic sections: Holt, Rinehart & Winston, New York, 253 p.
Knopf, E.B., & Earl Ingerson, 1938, Structural petrology: Geological Society of America Memoir 6, 270 p.
Krajewski, S.A., & B.L. Gibbs, 1996, Understanding Contouring: Gibbs Associates, Boulder, Colorado, 75 p.
Kranck, E.H., 1953, Interpretation of gneiss structures with special reference to Baffin Island: Proceedings of the Geological Association of Canada, v. 6, p. 59-68.
Kretz, Ralph, 1991, The dilation direction of intrusive sheets: Journal of Structural Geology, v. 13, p. 97-99.
Kuka, N., A. Shtuka & J.J. Royer, 1994, Desurv: an ANSI C program for borehole desurvey calculation by local least-squares fitting: Computers & Geosciences, v. 20, p. 919-960.
Kulander, B.R., S.L. Dean & B.J. Ward, Jr., 1990, Fractured core analysis: interpretation, logging, and use of natural and induced fractures in cores: Methods in Exploration Series, No. 8, American Association of Petroleum Geologists, 88 p.
Kupfer, D.H., 1966, Accuracy in geologic maps: Geotimes, v. 10, no. 7, p. 11-14.
Kutty, T.S., & Sojen Joy, 1994, RFPHI -- a program in TURBOC for the diagram method of two-dimensional strain analysis: Computers & Geosciences, v. 20, p. 247-263.
Lahee, x.x, 19xx, Field geology: Publisher, xxx p.
Laing, W.P., 1977, Structural interpretation of drill core from folded and cleaved rocks: Economic Geology, v. 72, p. 671-685.
Lambe, T.N., & R.V. Whitman, 1979, Soil Mechanics -- SI edition: John Wiley, New York, 553 p.
Lanczos, Cornelius, 1956, Applied analysis: Prentice-Hall, Englewood Cliffs, 539 p.
Langenberg, Willem, 1985, The geometry of folded and thrusted rocks in the Rocky Mountain Foothills near Grande Chache, Alberta: Canadian Journal of Earth Sciences, v. 22, p. 1711-1719.
Langenberg, Willem, Henry Charlesworth, & Allan La Rivier, 1988, Computer-constructed cross-section of the Morcles Nappe: Eclogae geologicae Helvetiae, v. 80, p. 655-667.
Langenberg, C.W., H.E. Rondeel & H.A.K. Charlesworth, 1977, A structural study in the Belgian Ardennes with sections constructed computer-based methods: Geologie en Mijnbouw, v. 56, p. 145-154.
Langstaff, C.S., & David Morrill, 1981, Geologic cross sections: International Human Resources Development Corporation, Boston, 108 p.
La Pointe, P.R., & J.A. Hudson, 1985, Characterization and interpretation of rock mass joint patterns: Geological Society of America Special Paper 199, 37 p.
Lau, J.S.O., 1983, The determination of true orientation of fractures in rock cores: Canadian Geotechnical Journal, v. 20, p. 221-227.
Laubscher, H.P., 1962, Die Zweiphasenhypothese der Jurafaltung: Eclogae geologicae Helvetiae, v. 55, p. 1-22.
Laubscher, H.P., 1965, Ein kinematisches Model der Jurafaltung: Eclogae geologicae Helvetiae, v. 58, p. 231-318.
Laubscher, H.P., 1977a, An intriguing example of a folded thrust in the Jura: Eclogae geologicae Helvetiae, v. 70, p. 97-104.
Laubscher, H.P., 1977b, Fold development in the Jura: Tectonophysics, v. 37, p. 337-362.
LeRoy, L.W., & J.W. Low, 1954, Graphic problems in petroleum geology: Harper & Row, New York, 238 p.
Leverson, I.A., 1960, Paleogeologic maps: Freeman, San Francisco, 174 p.
Leyshon, P.R., & R.J. Lisle, 1996, Stereographic projection techniques in structural geology: Butterworth-Heinemann, Ltd., Oxford, 104 p.
Lindqvist, J.K., 1982, A program for computing the true thickness of strata measured in a field traverse or drill-hole: Journal of Sedimentary Petrology, v. 52, p. 671-672.
Lisle, R.J., 1977, Clastic grain shape and orientation in relation to cleavage from the Aberystwyth grits, Wales: Tectonophysics, v. 39, p. 381-395.
Lisle, R.J., 1980, A simplified work scheme for using block diagrams with the orthographic net: Journal of Geological Education, v. 29, p. 81-83.
Lisle, R.J., 1985a, Geological Strain Analysis -- a manual for the method: Pergamon Press, Oxford, 99 p.
Lisle, R.J., 1985b, The facing of faults: Geological Magazine, v. 122, p. 249-251.
Lisle, R.J., 1988, Geologic structures and maps: Pergamon Press, Oxford, 150 p.
Lisle, R.J., 1990, Principal stress orientation from faults: an additional constraint: Annales Tectonicæ, v. 1, p. 155-158.
Lisle, R.J., 1991, Strain analysis by simplified Mohr constructions: Annales Tectonicæ, v. 5, p. 102-117.
Lisle, R.J., 1992a, Least squares best-fit circles (with applications to Mohr's circles): Mathematical Geology, v. 24, p. 455-461.
Lisle, R.J., 1992b, Strain estimation from flattened buckle folds: Journal of Structural Geology, v. 14, p. 369-371.
Lisle, R.J., 1994a, Detection of zone of abnormal strains in structures using Gaussian curvature analysis: American Association of Petroleum Geologists Bulletin, v. 78, p. 1811-1819.
Lisle, R.J., 1994b, Paleostrain analysis: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 28-42.
Lisle, R.J., & D.M. Ragan, 1988, Strain from three stretches --a simple method: Journal of Structural Geology, v. 10, p. 905-906.
Lisle, R.J., & J.M. Robinson, 1995, The Mohr circle for curvature and its application to fold description: Journal of Structural Geology, v. 17, p. 739-750.
Lisle, R.J., P. Styles & S.J. Freeth, 1990, Fold interference structures: the influence of layer competence contrast: Tectonophysics, v. 172, p. 197-200.
Lister, G.S., & P.F. Williams, 1983, The partitioning of deformation in flowing rock masses: Tectonophysics, v. 92, p. 1-33.
Lloyd, G.E., C.C. Ferguson & K. Reading, 1982, A stress-transfer model for the development of extensional fracture boudinage: Journal of Structural Geology, v. 4, p. 355-372.
Lobeck, A.K., 1958, Block diagrams: Emerson-Trussell, Amherst, 212 p.
Low, J.W., 1957, Geologic field methods: Harper & Row, New York, 489 p.
Lowe, K.E., 1946, A graphic solution for certain problems of linear structures: American Mineralogist, v. 31, p. 425-434.
Lund, B., & M.D. Zoback, 1999, Orientation and magnitude in situ stress to 6.5 km depth in the Baltic Shield: International Journal of Rock Mechanics and Mining Sciences, v. 36, p. 169-190.
MacDonald, 1980, Net tectonic rotation, apparent tectonic rotation, and the structural tilt correction in paleomagnetic studies: Journal of Geophysical Research, v. 85, p. 3659-3667.
Macelwane, J.B., & F.W. Sohon, 1932, Introduction to theoretical seismology, part II -- seismometry: St. Louis University, St. Louis, xxx p.
MacCaskie, D.R., 1986, Rapid field estimation of the degree of preferred orientation of elongate features: Journal of Geology, v. 94, p. 777-778.
Mackin, J.H., 1950, The down-structure method of viewing geologic maps: Journal of Geology, v. 58, p. 55-72.
Mackin, J.H., 1962, Structure of the Glenarm series in Chester County, Pennsylvania: Geological Society of America Bulletin, v. 73, p. 403-410.
Maltman, Alex, 1994, Prelithification deformation: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 143-158.
Mardia, K.V., 1972, Statistics of orientation data: Academic Press, London, 357 p.
Marjoribanks, R.W., 1974, An instrument for measuring dip isogons and fold layer shape parameters: Journal of Geological Education, v. 22, p. 62-64.
Marsh, O.T., 1960, A rapid and accurate contour interpolator: Economic Geology, v. 55, p. 1555-1560.
Marshak, Stephen & Nicholas Woodward, 1988, Introduction to cross-section balancing: in Stephen Marshak & Gautam Mitra, editors, Basic methods of structural geology, Prentice-Hall, Englewood Cliffs, New Jersey, p. 303-332.
Martel, S.J., 1999, Mechanical controls on fault geometry: Journal of Structural Geology, v. 21, p. 585-596.
Mase, G.E., 1970, Theory and problems of continuum mechanics: Schaum's Outline Series, McGraw-Hill Book Company, New York, 221 p.
Matthews, P.E., R.A.B. Bond, & J.J. Van den Berg, 1974, Analysis and structural implications of a kinematic model of similar folding: Tectonophysics, v. 12, p. 129-154.
McClay, K.R., 1987, The mapping of geologic structures: Geological Society of London Handbook Series, Open University Press, Milton Keynes, 161 p.
McCoss, A.M., 1987, Practical section drawing through folded layers using sequentially rotated cubic interpolators: Journal of Structural Geology, v. 9, p. 365-370.
McIntyre, D.B., 1963, Rotation of spherical projections: Technical Report No. 7, Department of Geology, Pomona College, Claremont, California, 7 p.
McIntyre, D.B., & L.E. Weiss, 1956, Construction of block diagrams to scale in orthographic projection: Proceedings of the Geologists Association, v. 67, p. 145-155.
McKinstry, H., 1961, Structure of the Glenarm Series in Chester County, Pennsylvania: Geological Society of America Bulletin, v. 72, p. 557-578.
McLeish, A.J., 1971, Strain analysis of deformed pipe rock in the Moine thrust zone, northwest Scotland: Tectonophysics, v. 12, p. 469-503.
McNaught, Mark, 1994, Modifying the normalized Fry method for aggregates of non-elliptical grains: Journal of Structural Geology, v. 16, p. 493-503.
McTigue, D.F., & C.C. Mei, 1981, Gravity-induced stresses near topography of small slope: Journal of Geophysical Research, v. 86, p. 9268-9278.
Means, W.D., 1976, Stress and strain -- Basic concepts of continuum mechanics for geologists: Springer-Verlag, New York, 339 p.
Means, W.D., 1987, A newly recognized type of slickenside striations: Journal of Structural Geology, v. 9, p. 585-690.
Means, W.D., 1990, Kinematics, stress, deformation and material behavior: Journal of Structural Geology, v. 12, p. 953-971.
Means, W.D., 1995, Shear zones and rock history: Tectonophysics, v. 247, p. 157-160.
Means, W.D., 1996, How to do anything with Mohr Circles -- a short course about tensors for structural geologists: Short Course Workbook, Geological Society of America, 66 p.
Mertie, J.B., Jr., 1922, Graphic and mechanical computation of thickness of stratum and distance to a stratum: U.S. Geological Survey Professional Paper 129-C, p. 39-52.
Mertie, J.B., Jr., 1940, Stratigraphic measurement in parallel folds: Geological Society of America Bulletin, v. 51, p. 1107-1133.
Mertie, J.B., Jr., 1943, Structural determinations from diamond drilling: Economic Geology, v. 38, p. 298-312.
Mertie, J.B., Jr., 1947, Delineation of parallel folds and measurement of stratigraphic dimensions: Geological Society of America Bulletin, v. 58, p. 779-802.
Michael, A.J., 1984, Determination of stress from slip data: faults and folds: Journal of Geophysical Research, v. 89, p. 11517-11526.
Middleton, G.V., 2000, Data analysis in the Earth Sciences using Matlab: Prentice-Hall, Inc., Upper Saddle River, New Jersey, 260 p.
Middleton, G.V., & P.R. Wilcox, 1994, Mechanics in the Earth and Environmental Sciences: Cambridge University Press, Cambridge, England, 459 p.
Milnes, A.G., 1977, A model for analysing the strain history of folded competent layers in deeper parts of orogenic belts: Eclogae geologicae Helvetiae, v. 64, p. 335-342.
Mitra, Shankar, 1992, Balanced structural interpretations in fold and thrust belts: in Shankar Mitra & G.W. Fisher, editors, Structural Geology of Fold and Thrust Belts, Johns Hopkins University Press, Baltimore, p. 53-77.
Mitra, Shankar, & Jay Namson, 1989, Equal-area balancing: American Journal of Science, v. 289, p. 563-599.
Mogi, Kiyoo, 1971, Fracture and flow of rocks under high triaxial compression: Journal of Geophysical Research, v. 76, p. 1255-1265.
Moon, F.C., 1992, Chaotic and fractal dynamics: John Wiley & Sons, Inc., New York, 508 p.
Mount, V.S., & John Suppe, 1987, State of stress near the San Andreas fault: implications for wrench fault tectonics: Geology, v. 15, p. 1143-1146.
Mountjoy, E.W., 1992, Significance of rotated folds and thrust faults, Alberta Rocky Mountains: in Shankar Mitra & G.W. Fisher, editors, Structural Geology of Fold and Thrust Belts, Johns Hopkins University Press, Baltimore, p. 207-223.
Mueller, B., V. Wehrle, & K. Fuchs ,1997, The 1997 release of the World Stress Map (available on-line at http://www-wsm.physik.uni-karlsruhe.de/pub/Rel97/wsm97.html)
Müller, Leopold, 1933, Untersuchungen über statistische Kluftmessung: Geologie und Bauwesen, v. 5, no. 4, p. 185-255.
Nadai, A., 1950, Theory of flow and fracture of solids, Volume 1: Second Edition, McGraw-Hill, New York, 572 p.
Narr, Wayne & John Suppe, 1994, Kinematics of basement-involved compressive structures: American Journal of Science, v. 294, p. 802-860.
Nye, J.F., 1985, Physical properties of crystals: revised edition, Clarenden Press, Oxford, 329 p.
Odling, N., 1987, The determination of `buckling rotation' and its application to theoretical and experimental models of buckle folds: Journal of Structural Geology, v. 9, p. 1021-1028.
O'Driscoll, E.S., 1962, Experimental patterns in superposed similar folding: Journal of the Alberta Society of Petroleum Geologists, v. 10, p. 145-167.
O'Driscoll, E.S., 1964, Cross fold deformation by simple shear: Economic Geology, v. 59, p. 1061-1093.
Oertel, Gerhard, 1962, Extrapolation in geologic fabrics: Geological Society of America Bulletin, v. 73, p. 325-342.
Oertel, Gerhard, 1996, Stress and deformation -- a handbook on tensor in geology: Oxford University Press, New York, 292 p.
O'Hara, K.D., 1994, Fluid-rock interaction in crustal shear zones: a directed percolation approach: Geology, v. 22, p. 843-846.
Okabe, Atsuyuki, Barry Boots & Kokichi Sugihara, 1992, Spatial tessellations -- concepts and applications of Voronoi diagrams: John Wiley & Sons, Inc., New York, 532 p.
Ottino, J.M., 1989, The mixing of fluids: Scientific American, v. 260, no. 1, p. 56-67.
Ottino, J.M., 1990, The kinematics of mixing: stretching, chaos, and transport: Cambridge University Press, Cambridge, 364 p.
Ottino, J.M., 1992, New applications of chaos in chemical engineering: intuition versus prediction: in J.H. Kim & John Stringer, editors, Applied Chaos, John Wiley & Sons, Inc., New York, p. 143-174.
Palmer, H.S., 1916, Nomographic solutions of certain stratigraphic measurements: Economic Geology, v. 11, p. 14-29.
Palmer, H.S., 1918, New graphic method for determining the depth and thickness of strata and the projection of dip: U.S. Geological Survey Professional Paper 120-G, p. 123-128.
Panozzo, Renée, 1984, Two-dimensional strain from the orientation of lines in a plane: Journal of Structural Geology, v. 6, p. 215-221.
Panozzo, Renée, 1987, Two-dimensional strain determination by the inverse SURFOR wheel: Journal of Structural Geology, v. 9, p. 115-119.
Passchier, C.W., & R.A.J. Trouw, 1996, Microtectonics: Springer-Verlag, Berlin, 289 p.
Peach, C.J., & R.J. Lisle, 1979, A FORTRAN IV program for the analysis of tectonic strain using deformed elliptical markers: Computers & Geoscience, v. 5, p. 325-334.
Peacock, D.C.P., R.J. Knipe & D.J. Sanderson, 2000, Glossary of normal faults: Journal of Structural Geology, v. 22, p. 291-305.
Pfiffner, O.A., 1981, Fold-and-thrust tectonics in the Helvetic Nappes (E Switzerland): in K.R. McClay & N.J. Price, editors, Thrust and nappe tectonics, Special Publication No. 9, Geological Society of London, p. 319-327.
Pfiffner, O.A., & J.G. Ramsay, 1982, Constraints on geological strain rates: arguments from finite strain states of naturally deformed rocks: Journal of Geophysical Research, v. 87, p. 311-321.
Phillips, F.C., 1963, An introduction to crystallography: Third Edition, John Wiley, New York, 340 p.
Phillips, F.C., 1971, The use of stereographic projection in structural geology: Third Edition, Edward Arnold, London, 90 p.
Phillips, W.E.A., & J.G. Byrne, 1969, The construction of sections in areas of highly deformed rocks: in P.E. Kent, G.E. Satterthwaite & A.M. Spencer, editors, Time and Place in Orogeny, Special Publication No. 3, Geological Society of London, p. 81-93.
Pincus, Howard, 1987, Point diagrams: in C.K. Seyfert, editor, The Encyclopedia of Structural Geology and Plate Tectonics, Van Nostrand Reinhold Co., New York, p. 634-646.
Platt, L.B., 1988, Interpretation of geologic maps: in Stephen Marshak & Gautam Mitra, editors, Basic methods of structural geology, Prentice-Hall, Englewood Cliffs, New Jersey, p. 177-192.
Poblet, Josep & Ken McClay, 1996, Geometry and kinematics of single-layer detachment folding: American Association of Petroleum Geologists Bulletin, v. 80, p. 1085-1109.
Pollard, D.D., S.D. Saltzer & A.M. Rubin, 1993, Stress inversion methods: are they based on faulty assumptions?: Journal of Structural Geology, v. 15, p. 1045-1054.
Powell, C.McA., 1974, Timing of slaty cleavage during folding of Precambrian rocks, northwest Tasmania: Geological Society of America Bulletin, v. 85, p. 1043-1060.
Price, N.J., 1966, Fault and joint development in brittle and semi-brittle rocks: Pergamon, Oxford, 176 p.
Price, N.J., 1970, Laws of rock behavior in the earth's crust: in W.H. Somerton, editor, Rock mechanics -- theory and practice, Procedings of the 11th Symposium on Rock Mechanics, American Institute Mining, Metallurgical and Petroleum Engineering, New York, p. 3-23.
Price, N.J., 1974, The development of stress systems and fracture patterns in undeformed sediments: Proceedings, Third Rock Mechanics Congress, International Society of Rock Mechanics, v. 1, p. 487-496.
Price, N.J., 1975, Rates of deformation: Journal of the Geological Society, v. 131, p. 553-575.
Price, N.J., & J.W. Cosgrove, 1990, Analysis of geologic structures: Cambridge University Press, Cambridge, 502 p.
Priest, S.D., 1985, Hemispherical projection methods in rock mechanics: George Allen & Unwin, London, 124 p.
Priest, S.D., 1993, Discontinuity analysis for rock engineering: Chapman & Hall, London, 473 p.
Pumpelly, Rafael, J.E. Wolfe & T.N. Dale, 1894, Geology of the Green Mountains in Massachusetts: U.S. Geological Survey Monograph 23, 206 p.
Ragan, D.M., 1969a, Introduction to concepts of two-dimensional strain and their application with the use of card-deck models: Journal of Geological Education, v. 17, p. 135-141.
Ragan, D.M., 1969b, Structures at the base of an ice fall: Journal of Geology, v. 77, p. 647-667.
Ragan, D.M., & M.F. Sheridan, 1972, Compaction of the Bishop Tuff, California: Geological Society of America Bulletin, v. 83, p. 95-106.
Ragan, D.M., 1987, Strain from three measured stretches: Journal of Structural Geology, v. 9, p. 897-898.
Ragan, D.M., & R.H. Groshong, Jr., 1993, Strain from two angles of shear: Journal of Structural Geology, v. 15, p. 1359-1360.
Rahm, P.C., 1986, Engineering geology: Elsevier, New York, 589 p.
Raleigh, Barry, & Jack Evernden, 1981, Case for low deviatoric stress in the lithosphere: in N.L. Carter, M. Friedman, J.M. Logan & D.W. Stearns, editors, Mechanical behavior of crustal rocks, Geophysical Monograph 24, American Geophysical Union, p. 173-186.
Ramberg, Hans, 1987, Drag Folds: in C.K. Seyfert, editor, The Encyclopedia of Structural Geology and Plate Tectonics, Van Nostrand Reinhold Co., New York, p. 206.
Ramsay, J.G., 1961, The effects of folding upon the orientation of sedimentary structures: Journal of Geology, v. 69, p. 84-100.
Ramsay, J.G., 1962, Interference patterns produced by the superposition of folds of similar type: Journal of Geology, v. 70, p. 466-481.
Ramsay, J,G., 1962, The geometry and mechanics of formation of ``similar'' type folds: Journal of Geology, v. 70, p. 309-327.
Ramsay, J.G., 1963, Structure and metamorphism of the Moine and Lewisian Rocks of the Northwest Caledonides: in M.R.W. Johnson & F.H. Stewart, editors, The British Caledonides, Oliver and Boyd, Edinburgh, p. 143-175.
Ramsay, J.G., 1964, The uses and limitations of beta-diagrams and pi-diagrams in the geometrical analysis of folds: Quarterly Journal of the Geological Society, v. 120, p. 435-454.
Ramsay, J.G., 1967, Folding and fracturing of rocks: McGraw-Hill, New York, 568 p.
Ramsay, J.G., 1969, The measurement of strain and displacement in orogenic belts: in P.E. Kent, G.E. Satterthwaite & A.M. Spencer, editors, Time and place in Orogeny, Special Publication No. 3, Geological Society of London, p. 43-79.
Ramsay, J.G., 1976, Displacement and strain: in J.G. Ramsay & D.S. Wood, editors, A discussion on natural strain and geologic structures: Philosophical Transactions of the Royal Society, London, v. 283A, p. 3-25.
Ramsay, J.G., 1980, Shear zone geometry: a review: Journal of Structural Geology, v. 2, p. 83-99.
Ramsay, J.G., 1992, Some geometric problems of ramp-flat thrust models: in K.R. McClay, editor, Thrust tectonics, Chapman & Hall, London, p. 191-200.
Ramsay, J.G., & M.I. Huber, 1983, The techniques of modern structural geology -- Volume 1: strain analysis: Academic Press, London, p. 1-307.
Ramsay, J.G., & M.I. Huber, 1987, The techniques of modern structural geology -- Volume 2: folds and fractures: Academic Press, London, p. 308-700.
Raup, D.M., & S.M. Stanley, 1978, Principles of paleontology: Second Edition, W.H. Freeman and Company, San Francisco, 481 p.
Reches, Ze'ev, 1978, Analysis of faulting in three-dimensional strain field: Tectonophysics, v. 47, p. 109-129.
Reches, Ze'ev, 1987, Determination of the tectonic stress tensor from slip along faults that obey the Coulomb yield condition: Tectonics, v. 6, p. 849-861.
Reches, Ze'ev, D.F. Hoexter, & Francis Hirsch, 1980, The structure of a monocline in the Syrian Arc System, Middle East -- surface and subsurface analysis: Journal of Petroleum Geology, v. 3-4, p. 413-425.
Reches, Ze'ev & D.A. Lockner, 1994, Nucleation and growth of faults in brittle rocks: Journal of Geophysical Research, v. 99, p. 18159-18173.
Redmond, J.L., 1972, Null combination in fault interpretation: American Association of Petroleum Geologists Bulletin, v. 56, p. 150-166.
Rettger, R.E., 1929, On specifying the type of subsurface structural contours: American Association of Petroleum Geologists Bulletin, v. 13, p. 1559-1561.
Rich, J.L., 1932, Simple graphical method for determining true dip from two components and for constructing contoured structural maps from dip observations: American Association of Petroleum Geologists Bulletin, v. 16, p. 92-95.
Rich, J.L., 1934, Mechanics of low-angle faulting as illustrated by Cumberland thrust block, Virginia, Kentucky, and Tennessee: American Association of Petroleum Geologists Bulletin, v. 18, p. 1584-1596.
Rickard, M.J., 1971, A classification diagram for fold orientation: Geological Magazine, v. 108, p. 23-26.
Rickard, M.J., 1972, Fault classification -- discussion: Geological Society of America Bulletin, v. 83, p. 2545-2546.
Roberts, Alan & Graham Yielding, 1994, Continental extension tectonics: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 223-250.
Robin, P.-Y.F. & C.E. Jowett, 1986, Computerized density contouring and statistical evaluation of orientation data using counting circles and continuous weighting functions: Tectonophysics, v. 121, p. 207-223.
Robinson, G.D., 1959, Measuring dipping beds: Geotimes, v. 4, p. 8-9, 24-27.
Rock, N.M.S., 1988, Numerical Geology: Springer-Verlag, Berlin, 427 p.
Rogers, R.D., 1991, How do we recognize a fault when we see one?: Journal of Geological Education, v. 39, p. 133-141.
Rowan, M.G., & Roy Kligfield, 1988, Cross section restoration and balancing as aid to seismic interpretation in extensional terranes: American Association of Petroleum Geologists Bulletin, v. 73, p. 955-966.
Rowland, S.M., & E.M. Duebendorfer, 1994, Structural analysis and synthesis: Second Edition, Blackwell Scientific Publications, Palo Alto, 279 p.
Sander, Bruno, 1948, Einführung in die Gefügekunde der geologischen Körper, Erster Teil, allgemeine Gefügekunde und Arbeiten im Bereich Handstück bis Profile: Springer-Verlag, Vienna, 215 p.
Sander, Bruno, 1970, An introduction to the study of fabrics of geological bodies: Pergamon Press, Oxford, 641 p.
Sawyer, W.W., 1955, Prelude to mathematics: Penguin Books, Ltd., Harmondsworth, 214 p.
Schedl, Andrew & B.A. van der Pluijm, 1988 A review of deformation microstructures:; Journal of Geological Educations, v.  36. p. 111-121.
Scheid, Francis, 1988, Theory and problems of numerical analysis: Second Edition, Schaum's Outline Series, McGraw-Hill Book Co., New York, 471 p.
Schmidt, Walter, 1925, Gefúgestatistik: Tschermak's Mitteilungen, v. 38, p. 392-423.
Scholz, C.H., 1992, The brittle-plastic transition and the depth of seismic faulting: Geologische Rundschau, v. 77, p. 319-328.
Schroeder, Manfred, 1990, Fractals, chaos, power laws -- minutes from an infinite paradise: W.H. Freeman and Company, New York, 429 p.
Schryver, K., 1966, On the measurement of the orientation of axial plane of minor folds: Journal of Geology, v. 74, p. 83-84. Schultz, R.A., 1996, Relative scale and the strength and deformability of rock masses: Journal of Structural Geology, v. 18, p. 1139-1149.
Schweinfurth, S.P., 1969, Contour finder -- inexpensive device for rapid, objective contouring: U.S. Geological Survey Professional Paper, 650-B, p. B147-B148.
Schwerdtner, W.M., 1978, Determination of stratigraphic thickness of strained units: Canadian Journal of Earth Science, v. 15, p. 1379-1380.
Schwerdtner, W.M., P.J. Bennett, & T.W. Janes, 1977, Application of L-S fabric scheme to structural mapping and paleostrain analysis: Canadian Journal of Earth Science, v. 14, p. 1021-1032.
Screven, R.W., 1963, A simple rule of V's of outcrop patterns: Journal of Geological Education, v. 11, p. 98-100.
Sellés-Mart´, Jose, 1993, A common misinterpretation of the equal-area properties: Journal of Structural Geology, v. 15, p. 1261-1353.
Seymour, D.B., & C.A. Boulter, 1979, Tests of computerised strain analysis by the analysis of simulated deformation of natural unstrained sedimentary fabrics: Tectonophysics, v. 58, p. 221-235.
Shackleton, R.M., 1958, Downward-facing structures of the Highland Border: Quarterly Journal of the Geological Society of London, v. 113, p. 361-392.
Shaw, J.H., S.C. Hook & John Suppe, 1994, Structural trend analysis by axial surface mapping: American Association of Petroleum Geologists Bulletin, v. 78, p. 700-721.
Shorrock, Christopher & R.J. Lisle, 1998, Datacon: A Quickbasic program to reformat orientation from faults: Computers & Geosciences, v. 24, p. 585-590.
Sibson, R.H., 1974, Frictional constraints on thrust, wrench and normal faults: Nature (Physical Sciences), v. 249, p. 542-543.
Sibson, R.H., 1981, Fluid flow accompanying faulting: field evidence and models: in D.W. Simpson & P.G. Richards, editors, Earthquake prediction -- an international review: Maurice Ewing Series 4, American Geophysical Union, p. 593-603.
Sibson, R.H., 1984, Roughness at the base of the seismogenic zone: contributing factors: Journal of Geophsical Research, v. 89, no. B7, p. 5791-5799.
Sibson, R.H., 1985, A note on fault reactivation: Journal of Structural Geology, v. 6, p. 751-754.
Sibson, R.H., 1986, Earthquakes and rock deformation in crustal fault zones: Annual Revieww of Earth and Planetary Science, v. 14, p. 149-175.
Sikorsky, R.I., 1991, A diagram for interpreting orientation data for planar features in core: Journal of Structural Geology, v. 13, p. 1085-1089.
Simpson, Carol, 1988, Analysis of two-dimensional strain: in Stephen Marshak & Gautam Mitra, editors, Basic methods of structural geology, Prentice-Hall, Englewood Cliffs, New Jersey, p. 333-359.
Simpson, Carol, & S.M. Schmid, 1983, An evaluation of criteria to deduce the sense of movement in sheared rocks: Geological Society of America Bulletin, v. 94, p. 1281-1288.
Sitter, L.U. de, 1958, Bouding and parasitic folds in relation to cleavage and folding: Geologie en Mijnbouw, v. 20, p. 277-286.
Snoke, A.W., Jan Tullis & V.R. Todd (editors): Fault-related rocks -- a photographic atlas: Princeton University Press, Princeton, New Jersey, 617 p.
Sohon, F.W., 1941, The stereographic projection: Chemical Publishing Co., Inc., New York, 210 p.
Sprenke, K.F., 1992, Analytic geometry formulas and computer routines for stereonet problems: Journal of Geological Education, v. 40, p. 109-115.
Srivastava, H.B., 1995, Two dimensional strain estimation from weakly deformed rocks: Annales Tectonicæ, v. 9, p.3-6.
Stauffer, M.R., 1966, An empirical-statistical study of three dimensional fabric diagrams as used in structural analysis: Canadian Journal of Earth Science, v. 3, p. 473-498.
Stauffer, M.R., 1968, The tracing of hinge-line ore bodies in areas of repeated folding: Canadian Journal of Earth Science, v. 5, p. 69-79.
Stauffer, M.R., 1973, New method for mapping fold axial surfaces: Geological Society of America Bulletin, v. 84, p. 2307-2318.
Steidel, R.F., Jr., & J.M. Henderson, 1983, The graphic languages of engineering: John Wiley, New York, 534 p.
Stein, H.A., 1941, A trigonometric solution of the two-drillhole problem: Economic Geology, v. 36, p. 84-94.
Stein, R.S., & S.E. Barrientos, 1885, The 1983 Borah Peak, Idaho, Earthquake: in R.S. Stein & R.C. Bucknam, editors, Workshop XXVIII On the Borah Peak, Idaho, Earthquake, U.S. Geological Survey Open-file Report 85-290, p.459-482.
Stewart, I.S, & P.L. Hancock, 1990, What is a fault scarp?: Episodes, v. 13, p. 256-236.
Stone, D.S., 1991, Analysis of scale exaggeration on seismic profiles: American Association of Petroleum Geologists Bulletin, v. 75, p. 1161-1177.
Suter, H.H., 1947, Exaggeration of vertical scale of geologic sections: American Association of Petroleum Geologists Bulletin, v. 31, p. 318-339.
Suppe, John, 1983, Geometry and kinematics of fault-bend folding: American Journal of Science, v. 283, p. 684-721.
Suppe, John, 1985, Principles of structural geology: Prentice-Hall, Englewood Cliffs, New Jersey, 537 p.
Swan, A.R.H., & M. Sandilands, 1995, Introduction to geological data analysis: Blackwell Science Ltd., Oxford, 446 p.
Talbot, C.J., 1970, The minimum strain ellipsoid using deformed quartz veins: Tectonophysics, v. 9, p. 47-76.
Tanner, W.F., 1953, Use of apparent dip in measuring thickness: American Association of Petroleum Geologists Bulletin, v. 37, p. 566-567.
Tauxe, L., & G.S. Watson, 1994, The fold test: an eigen analysis approach: Earth and Planetary Science Letters, v. 122, p. 331-341.
Tearpock, D.J., & R.E. Bischke, 1991, Applied subsurface geologic mapping: Prentice-Hall, Englewood Cliffs, 648 p.
Ten Haaf, Ernst, 1959, Graded beds of the northern Apennines: Thesis, University of Groningen, 102 p.
Terzaghi, R.D., 1965, Sources of error in joint surveys: Géotechnique, v. 15, p. 287-304.
Tewksbury, B.J., 1996, Using graphics programs to help students understand strain: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 57-73.
Thiessen, R.L., & W.D. Means, 1980, Classification of fold interference patterns: a reexamination: Journal of Structural Geology, v. 2, p. 311-316.
Thomas, G.B., Jr., & R.L. Finney, 1996, Calculas and analytic geometry: Ninth Edition, Addison-Wesley Publishing Company, Reading, Massachusetts, 1130 p.
Thompson, G.A., 1960, Problem of late Cenozoic structure of the Basin Ranges: 21st International Geological Congress, Copenhagen, v. 18, p. 62-68.
Thompson, R.I., 1981, The nature and significance of large `blind' thrusts within the northern Rocky Mountains of Canada: in K.R. McClay & N.J. Price, editors, Thrust and Nappe Tectonics, Geological Society of London, Special Publication No. 9, p. 449-462.
Thomson, William, & P.G. Tait, 1867, Treatise on Natural Philosophy, vol. 1, Oxford, England.
Thomson, William, & P.G. Tait, 1962, Principles of mechanics and dynamics, Part I: Dover Publications, New York, 508 p.
Threet, R.L., 1973a, Classification of translational fault slip: Geological Society of America Bulletin, v. 84, p. 1825-1828.
Threet, R.L., 1973b, The down-dip method of viewing geologic maps to obtain sense of fault separation: Geological Society of America Bulletin, v. 84, p. 4001-4004.
Tikoff, Basil & Haakon Fossen, 1996, Visualization of deformation: computer applications for teaching: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 75-96.
Tikoff, Basil, Christian Teyssier & Haakon Fossen, 1993, Computer applications for teaching general two-dimensional deformation: Journal of Geological Education, v. 41, p. 425-432.
Tjia, H.D., 1964, Slickensides and fault movements: Geological Society of America Bulletin, v. 75, p. 683-686.
Tolson, Gustavo & Francisco Correa-Mora, 1996, Manipulation of orientation data using spreadsheet software: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 237-243.
Townend, John & M.D. Zoback, 1999+, How faulting keeps the crust strong: Geology, v. zz, p. xx-yy.
Treagus, S.H., 1981, A simple-shear construction from Thomsom & Tait (1867): Journal of Structural Geology, v. 3, p. 291-293.
Treagus, S.H., 1982, A new isogon-cleavage classification and its application to natural and model fold studies: Geological Journal, v. 17, p. 49-64.
Treagus, S.H., 1987, Mohr circles for strain, simplified: Geological Journal, v. 22, p. 119-132.
Truesdell, C., 1954, The kinematics of vorticity: Indiana University Press, Bloomington, 232 p.
Truesdell, C., & R. Toupin, 1960, The classical field theories: Encyclopedia of Physics, v. III/1, p. 226-793.
Truesdell, C.A.,III, 1991, A first course in rational continuum mechanics, Volume 1 General Concepts: Second Edition, Academic Press, Boston, 391 p.
Turcotte, D.L., 1997, Fractals and chaos in geology and geophysics: Second Edition, Cambridge University Press, Cambridge, 298 p.
Turner, F.J. & L.E. Weiss, 1963, Structural analysis of metamorphic tectonites: McGraw-Hill, New York, 545 p.
Vacher, H.L., 1989, The three-point problem in the context of elementary vector analysis: Journal of Geological Education, v. 37, p. 280-287.
Verhoogen, John, F.J. Turner, L.E. Weiss, Clyde Wahrhaftig & W.S. Fyfe, 1970, The earth: Holt, Rinehart & Winston, New York, 748 p.
Versteeg, J.K., & W.A. Morris, 1994, Pitfalls and procedures for determining fabric orientation in non-oriented bore cores: Journal of Structural Geology, v. 16, p. 283-286.
Visser, R.L.M., & B. Bollegraaf, 1989, An algorithm for rotation of axial data: Computers & Geosciences, v.. 15, p. 157-161.
Vistelius, A.B., 1966, Structural diagrams: Pergamon, Oxford, 178 p.
Vollmer, F.W., 1988, An application of eigenvalue methods to structural domain analysis: Geological Society of America Bulletin, v. 102, p. 786-791.
Vollmer, F.W., 1995, C program for automatic contouring of spherical orientation data using a modified Kamb method: Computers & Geosciences, v. 21, p. 31-49.
Wallace, R.E., 1951, Geometry of shearing stress and relation to faulting: Journal of Geology, v. 59, p. 118-130.
Wallbrecher, Eckard, 1986, Tektonische und gefügeanalytische Arbeitsweisen: graphische, rechnerische und statistische Verfahren: Ferdinand Enke Verlag, Stuttgart, 244 p.
Walpole, R.E., & R.H. Myers, 1993, Probability and statistics for engineers and scientists: Fifth Edition, Macmillan, New York, 766 p.
Warner, Jeffery, 1969, FORTRAN IV program for construction of pi-diagrams with the Univac 1108 computer: Computer Contributions, Lawrence, Kansas.
Warner, F.M., & M. McNeary, 1959, Applied descriptive geometry: Fifth Edition, McGraw-Hill, New York, 243 p.
Watson, D.F., 1992, Contouring, a guide to the analysis and display of spatial data: Pergamon Press, Oxford, 321 p.
Watson, D.F., 1994, nngridr: An Implementation of Natural Neighbor Interpolation: David Watson, P.O. Box 734, Claremont, WA 6010, Australia, 170 p.
Watson, G.S., 1983, Statistics on spheres: John Wiley, New York, 283 p.
Watson, G.S., 1988, The computer simulation treatment of directional data: Recent Researches in Geology, Geological Survey of Canada, v. 12, p. 19-23.
Weaver, J.D., 1975, Slickensides and slickenlines: Geological Magazine, v. 112, p. 400-408.
Weijermars, Ruud, 1982, Definition of vergence: Journal of Structural Geology, v. 4, p. 505.
Weijermars, Ruud, 1997a, Principles of rock mechanics: Alboran Science Publishing, Amsterdam, 360 p.
Weijermars, Ruud, 1997b, Pulsating oblate and prolate three-dimensional strains: Mathematical Geology, v. 29, p. 17-41.
Weijermars, Ruud, 1997c, Structural geology and map interpretation: Alboran Science Publishing, Amsterdam, 378 p.
Weinberger, Ram, Amotz Agnon, Hagai Ron & Zvi Garfunkel, 1995, Rotation about an inclined axis: three dimensional matrices for reconstructing paleomagnetic and structural data: Journal of Structural Geology, v. 17, p. 777-782.
Weiss, L.E., 1969, Flexural-slip folding of foliated model materials: in A.J. Baer & D.K. Norris, editors, Research in Tectonics, Geological Survey of Canada, Paper 68-52, p. 294-357.
Wegmann, C.E., 1929, Beispiele tektonischer Analysen des Grundgebirges in Finnland: Bulletin de la Commission géologique de Finlande, no. 87, p. 98-127.
Wellman, H.G., 1962, A graphic method for analysing fossil distortion caused by tectonic deformation: Geological Magazine, v. 99, p. 348-352.
Wentworth, C.K., 1930, The plotting and measurement of exaggerated cross-sections: Economic Geology, v. 25, p. 827-831.
Wernicke, Brian & B.C. Burchfiel, 1982, Modes of extensional tectonics: Journal of Structural Geology, v. 4, p. 105-115.
Whisonant, R.C., & C.F. Watts, 1989, Using dip vectors to analyze structural data: Journal of Geological Education, v. 37, p. 187-189.
Wickham, John & George Moeckel, 1997, Restoration of structural cross-sections: Journal of Structural Geology, v. 19, p. 975-986.
Wilkinson, P., N.J. Soper & A.M. Bell, 1975, Skolithos pipes as strain markers in mylonites: Tectonophysics, v. 28, p. 143-157.
Williams, G.D., 1984, The calculation of horizontal thrust transport using excess area in cross-sections: Tectonophysics, v. 104, p. 177-182.
Williams, G.D., & T.J. Chapman, 1979, The geometrical classification of noncylindrical folds: Journal of Structural Geology, v. 1, p. 181-185.
Williams, G.D., & T.J. Chapman, 1983, Strains developed in the hanging walls of thrusts due to their slip/propagation rate: a dislocation model: Journal of Structural Geology, v. 5, p. 563-571.
Williams, P.F., L.B. Goodwin & Steven Ralser, 1994, Ductile deformation processes: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 1-27.
Wilson, Gilbert, 1961, Tectonic significance of small scale structures and their important to the geologist in the field: Annales de la Société Géologique de Belgique, v. 84, p. 423-548.
Wilson, Gilbert, 1967, The geometry of cylindrical and conical folds: Proceedings of the Geologists Association, v. 78, p. 179-210.
Wilson, Gilbert, 1982, Introduction to small-scale geological structures: George Allen & Unwin, London, 128 p. [revision of Wilson, 1961]
Wiltschko, D.V., & W.M. Chapple, 1977, Flow of weak rocks in Appalachian Plateau folds: American Association of Petroleum Geology Bulletin, v. 61, p. 653-670.
Wise, D.U., D.E. Dunn, J.T. Engelder, P.A. Geiser, R.D. Hatcher, S.A. Kish, A.L. Odom & S. Schamel, 1984, Fault-related rocks: Suggestions for terminology: Geology, v. 12, p. 391-394.
Wojtal, Stephen, 1988, Objective methods for constructing profiles and block diagrams: in Stephen Marshak & Gautam Mitra, editors, Basic methods of structural geology, Prentice-Hall, Englewood Cliffs, New Jersey, p. 269-302.
Wojtal, Stephen & Jonathan Pershing, 1991, Paleostresses associated with faults of large offset: Journal of Structural Geology, v. 13, p. 49-62.
Woodcock, N.H., 1976, The accuracy of structural field measurements: Journal of Geology, v. 84, p. 350-355.
Woodcock, N.H., & C. Schubert, 1994, Continental strike-slip tectonics: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 251-263.
Woodward, N.B., S.E. Boyer & John Suppe, 1985, An outline of balanced cross-sections: Studies in Geology 11, Department of Geological Sciences, University of Tennessee, Knoxville, 170 p.
Woodward, N.B., S.E. Boyer & John Suppe, 1989, Balanced geological cross-sections: an essential technique in geological research and exploration: Short Course in Geology: v. 6, American Geophysical Union, 132 p.
Wright, F.E., 1911, The methods of petrographic microscope research: Publication No. 158, Carnegie Institution of Washington, 204 p.
Yow, J.L., Jr., 1987, Blind zone in the acquisition of discontinuity orientation data: International Journal of Rock Mechanics and Mining Science & Geomechanical Abstracts, v. 24, p. 317-318.
Yu, H., & Y. Zheng, 1984, A statistical analysis applied to the method: Tectonophysics, v. 110, p. 151-155.
Zhang, Hubao & Marcia Bjørnerud, 1995, A Mackintosh application program for simulating shear-sense indicators using object-oriented programming: Computers & Geosciences, v. 21, p. 365-375.
Zimmer, P.W., 1963, Orientation of small diameter drill core: Economic Geology, v. 28, p. 1313-1325.
Zoback, M.D.,
Zoback, M.L., 1992, First and second order patterns of stress in the lithosphere: The World Stress Map Project: Journal of Geophysical Research, v. 97, p. 11703-11728.

BOOKS and whatnot

Gautam Mitra & Steven Wojtal, editors, Geometries and mechanisms of thrustings, with special reference to the Appalachians, Geological Society of America Special Paper 222, p. 000-000.
Stephen Marshak & Gautam Mitra, editors, Basic methods of structural geology, Prentice-Hall, Englewood Cliffs, New Jersey, p. zzz-xxx.
De Paor, D.G., 1996, A computer laboratory for structural geologists: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 3-12.
James, P.R. & Ian Clark, 1996, GeologiCAL structure -- multimedia presentation and modelling software: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 13-37.
Byron, Dave & Bill Sowerbutts, 1996, Courseware: rock deformation and geological structures: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 39-42.
Allison, Iain, 1996, A structural study of North Sea petroleum traps using HyperCard: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 43-50.
De Paor, D.G. & Carol Simpson, 1996, Visualization of basic structural geometries with Structure Lab 1: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 51-56.
Simpson, Carol & D.G. De Paor, 1996, Computer-aided understanding of deformation mechanisms: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 97-103.
Bjørnerud, M.G. & Brian Boyer, 1996, Image analysis in structural geology using NIH Image: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 105-121.
Park, Youngdo, 1996, Synkinematic microscopic analysis using NIH Image: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 123-134.
Bons, Paul & M.W. Jessell, 1996, Image analysis of microstructures in natural and experimental samples: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 135-166.
Lapierre, Johan, David Mainprice & W.B. Ismail, 1996, Calculation of rock properties from pole figures using LabView: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 167-178.
Jacobson, D.E., 1996, SpheriCAD: an AutoCAD program for analysis of structural orientation data: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 181-193.
Starkey, John, 1996, A computer program to print inclined spherical projections: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 195-202.
Starkey, John, 1996, Presentation of orientation data in spherical projection: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 203-215.
Starkey, John, 1996, Microcomputers and the optical universal stage: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 217-232.
De Paor, D.G., 1996, Stereonet applications for Windows and Macintosh: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 233-235.
Beam, E.C., 1996, Modeling growth and rotation of porphyroblasts and inclusion trails: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 247-258.
Kanagawa, Kyuichi, 1996, Simulated pressure fringes, vorticity and progressive deformation: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 259-283.
Zimmerman, Jay, 1996, Flinn diagram construction on Macintosh computers: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 285-292.
Zimmerman, Jay, 1996, A modified data input procedure for the Fry 5.8 strain analysis applications: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 293-295.
Bobyarchick, A.R., 1996, Review of Theorist: a symbolic mathematics and graphics application: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 299-301.
Jessell, M.W. & R.K. Valenta, 1996, Structural geophysics: integrated structural and geophysical modelling: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 303-324.
Ciscato, Bruno, 1996, Principal stress orientation from faults: a C++ program: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 325-342.
Nakamura, Norihiro, Kenshiro Otsuki & Hiroyuki Nagahama, 1996, A spring-network model of fault-system evolution: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 343-358.
Crider, J.G., M.L. Cooke, E.J.M. Willemse & J R. Arrowsmith, 1996, Linear-elastic crack models of jointing and faulting: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 359-388.
De Paor, D.G., 1996, Bézier curves and geological design: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 389-417.
Spark, R.N. & P.F. Williams, 1996, Digital terrain models and the visualization of structural geology: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 421-446.
De Paor, D.G., 1996, Computation of orientations for GIS -- the `roll' of quaternions: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 447-456.
Adams, M.G., L.D. Mallard, C.H. Trupe & K.G. Stewart, 1996, Computerized map compilation: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 457-470.
Matsah, M.I. & Timothy Kusky, 1996, Fieldlog: GIS software as a mapping aid for structural geologists: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 471-475.
Groshong, R.H., Jr., & J.-L. Epard, 1996, Computerized cross section balance and restoration: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 477-498.
De Paor, D.G., 1996, Bitmap rotation, raster shear, and block diagram construction: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 499-511.